Aman Machinery Co.,Ltd
Aman Machinery Co.,Ltd
Add to Cart
1.adopting only one girder for the injection and blowing positions. there will be more space on the work table , and then it's easy to install the molds. the core rod's gyration semidiameter is more than before ,now the products' height is increased to 175mm.
2.high-pressure hydraulic clamping device use accumulator to hold presure ,to improve productivity and save energy.
3.the work table is cast by ductile cast iron ,and it is more thick ,more strong and more steady
4.figure is be improved ,it will hold much less space, and looks nice.
|
NO |
ITEMS |
DATA |
NO |
ITEMS |
DATA |
NO |
ITEMS |
DATA |
|
1 |
Dia. Of Screw |
40mm |
9 |
Idle time |
6 s |
17 |
Consumption of cooling water |
3cbm/h |
|
2 |
Max Injection Capacity |
158cm3 |
10 |
Max size of mold |
300*200mm |
18 |
Dimension of machine |
3.1*1.1*2.2m |
|
3 |
Power of Cylinder-heating |
6.5kw |
11 |
Min thickness of mold |
180mm |
19 |
Weight of machine |
3.5ton |
|
4 |
Heating Control |
3 sets |
12 |
Motor power |
15kw |
20 |
Range of products Vol. |
0.003-0.6L |
|
5 |
Clamping Force Of Injection |
300kn |
13 |
Heating power of mold |
Custom |
21 |
Max. length of products |
190mm |
|
6 |
Injection Mold Opening stroke |
120mm |
14 |
Pressure of hydraulic system |
14mpa |
22 |
Max. Dia of products |
100mm |
|
7 |
Clamping Force Of Blowing |
30kn |
15 |
Max pressure of compressed air |
1.2mpa |
23 |
Conveyor belt motor power |
0.37kw |
|
8 |
Blowing Mold Opening Stroke |
120mm |
16 |
Discharge rate of compressed air |
>0.8cbm/min |
24 |
Total power |
25kw |